Bendix Style Front Brake Kit for 1937-48 Ford Spindles. 12×2 Inch

If you want the early look but are reluctant to utilize old non-energizing drum brakes. we have just what you need. This complete front drum brake kit includes backing plate assembly. brake drums. wheel hub. wheel bearings and seals.  Our 100% new self-energizing backing plate assemblies come complete with shoes. wheel cylinders and hardware. Fits either the front of 1937-48 Ford cars or 1937-47 Ford half-ton pickups.  The new 12" x 2" brake drums and wheel hubs are front early Ford car of the 1940 design which was slip-over drum configuration (brake drum mounts to the "front" side of the hub).  Studs are installed on a 5 on 5-1/2" bolt circle.   Kit Includes (1) Bendix style brake backing plate assembly. pair. (2) 12" x 2" Brake Drum. (2) Early Ford front wheel hub. 5"x5-12" bolt pattern. (2) Inner bearings. (2) Outer bearings. (2) Inner wheel seals. (2) Inner bearing races. (2) Outer bearing races. Wheel Cylinder Inlet: 7/16"-20 straight thread NOT 7/16"-20 IFF Inlet fitting will require a sealing washer or O-ring style fitting Bolt Pattern: 3-3/8" center-to-center both horizontal and vertically If using Model A or B spindles the holes will have to be elongated inward to fit the narrower bolt pattern We recommend utilize of adapter rings 916-31928 to keep the spindle centered in the backing plate

• Kit Includes brake backing plate assembly. drums. wheel hubs. bearings and seals for both right and left sides
• Self-energizing 12 x 1-3/4 or 12 x 2 backing plate assembly complete with shoes. wheel cylinders and hardware
• New iron 12 x 2 brake drum and wheel hubs with 5 x 5-1/2 bolt circle
• Fits front of ’37-’48 Ford cars and ’37-’47 1/2 ton pickups
• Wheel cylinder inlet is 7/16-20 straight thread. *NOT* IFF